Carbon Steel
产品服务热线:0086-416-8301559 8302059
邮箱:563117193@qq.com
Copyright© 2017 锦州万得焊材有限公司 all rights reserved.
辽ICP备17014853号-1 技术支持中企动力
产品描述
符合标准:
GB/T 5293 F5A3-H08MnA AWS A5.17 F7A3-EM12K
说明:WD-EM12K焊缝金属具有优良的耐气孔性。焊道外观平整、效率高、平角焊时,焊道外观平整,焊渣剥离性优。
用途:适用于一般结构中、厚板的多层焊接。
焊丝及熔敷金属化学成分典型值(wt%):
熔敷金属力学性能典型值:
注意事项:
1、焊剂如果受潮,在使用前须经300~350℃烘焙2小时。
2、焊接处须清除铁锈、油污、水分等杂质。
WD-EM12K Submerged Arc Welding Wire
Standards: GB/T 5293 F5A3-H08MnA AWS A5.17 F7A3-EM12K
Introduction
WD-EM12K weld seam metal has excellent gas porosity-resisting property. Weld bead has a neat appearance with high welding efficiency and for flat fillet welding, slag is especially easy to remove.
Applications
Suitable for multi-layer welding for common structures fabricated by medium and thick plates.
Typical Chemical Composition of Wire and Deposited Metal (wt%)

Typical Mechanical Properties of Deposited Metal

Notice:
1. Flux should be redried at 300~350°C for 2 hours.
2. All dust, oil and rust should be removed.